Nidec/Emerson Condenser Fan Motor 1/3 HP 825 RPM 230V 2-Speed

The Nidec/Emerson 5464 is a 1/3 horsepower, 825 RPM, 230 volt two-speed condenser fan motor for outdoor fan applications in condensing units using large-diameter, low-speed blades.

Combining two-speed operation with a six-pole design gives the equipment manufacturer two useful operating points at low tip speed. High speed handles full-load heat rejection on a hot day; low speed serves reduced-capacity operation and low-ambient conditions, and the already modest tip speed means the unit becomes very quiet at the lower setting.

The speed change is commanded by the equipment controls, typically through a relay, a head pressure control, or an outdoor thermostat. When replacing the motor, record the existing connections and reproduce them. Leaving the low-speed lead disconnected produces a motor that runs correctly in summer and misbehaves in cool weather, which is a difficult fault to relate back to the repair months later.

The motor requires a permanently connected run capacitor of the specified value, and capacitance requirements can differ between speed configurations.

Confirm horsepower, RPM, voltage, rotation, speed arrangement, frame diameter, shaft diameter and length, mounting method, and capacitor rating before ordering.

Brand

Nidec/Emerson

SKU

5464

Category

Condenser Fan Motors

Weight

14.1 lbs

Dimensions

10.30" x 5.60" x 5.60"

Price

$204.00

Availability

In stock (9 available)

Rating

0 / 5.0