DiversiTech 10IN 650CFM Duct 625-AF10

The DiversiTech 625-AF10 is a 10 inch inline duct fan rated at approximately 650 CFM, installed within a duct run to boost or establish airflow.

Inline duct fans solve airflow problems that cannot be corrected at the equipment. A long branch run, a room at the end of a trunk, an addition served by an extended duct, or a converted attic or basement space frequently receives inadequate air because the system blower cannot overcome the resistance of that particular path without over-supplying every other outlet. Installing a fan in the affected run raises airflow to that outlet without disturbing the balance of the system.

The same configuration serves dedicated ventilation duties: exhaust from bathrooms, kitchens, workshops, and equipment rooms where the fan must be located remotely from the grille, either because the run is long or because fan noise at the grille is unacceptable.

Placing the fan away from the terminal point is itself a benefit, since noise at the outlet is substantially reduced compared with a grille mounted fan.

At 10 inch duct diameter and approximately 650 CFM, the unit suits substantial branch runs and moderate exhaust duties.

Mount the fan in a straight section with adequate clearance for service, observe the airflow direction marking, support the duct on both sides so the fan does not carry the weight of the run, and provide a suitable electrical connection and switching arrangement.

Brand

DiversiTech

SKU

625-AF10

Category

Exhaust & Duct Fans

Weight

4.2 lbs

Dimensions

10.00" x 10.00" x 8.00"

Price

$139.00

Availability

In stock (9 available)

Rating

0 / 5.0