CDI Torque SNP2502MRMH Type Micrometer Adjustable Dual Scale 3/8 Inch 1 in lb

The CDI Torque SNP2502MRMH is a micrometer adjustable dual scale torque wrench, 3/8 inch drive, 11-1/4 inch overall length, primary scale range 30 to 250 in-lb, primary scale increment 1 in-lb, weight 0.95 lb.

A torque wrench is a measuring instrument and it should be treated like one, which is the thing most shops get wrong.

Three practices govern whether it stays accurate. Store it at its lowest setting — the mechanism is a calibrated spring, and a spring left compressed on a shelf takes a permanent set and drifts. Never use it to loosen a fastener; breaking a bolt loose applies uncontrolled torque backwards through a calibrated mechanism. And never extend the handle: the calibration assumes force applied at a specific point, and a pipe over the handle invalidates it entirely.

Calibration is also periodic rather than permanent. A torque wrench dropped on a concrete floor should be considered out of calibration until it is checked, regardless of how it looks.

The dual scale gives both inch-pounds and Newton-metres, which matters because specifications arrive in whichever unit the manufacturer used.

The 1 in-lb increment across a 30 to 250 in-lb range is fine resolution, which is what this range needs — these are small fasteners where the difference between correct and stripped is not large.

The 3/8 inch drive is the standard for this torque range.

Brand

CDI Torque

SKU

SNP2502MRMH

Category

Hand Tools

Weight

1.4 lbs

Dimensions

11.25 x 1.50 x 1.25

Price

$119.95

Availability

In stock

Rating

0 / 5.0