DiversiTech Conduit Whip 3/4" LI 6-34-6NM-2

The DiversiTech 6-34-6NM-2 is a 3/4 inch electrical whip, a prefabricated flexible conduit and conductor assembly for connecting outdoor HVAC equipment to a disconnect switch.

The 3/4 inch trade size accommodates larger conductors than the 1/2 inch version, suiting equipment with higher minimum circuit ampacity such as larger residential condensing units, light commercial packaged equipment, and three phase outdoor sections. Conduit size must be adequate for the conductors installed, and the larger trade size also eases the pull and reduces conductor damage during installation.

Prefabricated whips address the practical requirements of the final equipment connection: flexibility to absorb compressor and fan vibration, weather resistance for an outdoor wet location, and enough slack for the unit to be shifted during service without disturbing the disconnect. Building this connection in the field requires cutting conduit, pulling conductors, and fitting weatherproof connectors at both ends. A factory assembly reduces that to mounting and terminating, with consistent connector fit and conductor length.

Applications include residential and commercial condensing units, heat pump outdoor sections, packaged rooftop equipment, and refrigeration condensing units requiring a flexible final connection at the disconnect.

Verify that the conductor gauge within the whip satisfies the equipment nameplate minimum circuit ampacity and that the maximum overcurrent protective device rating is respected upstream. Confirm the assembly carries the correct rating for outdoor wet location use, support the conduit as required by code, and torque connectors and terminations properly at both ends before energizing.

Brand

DiversiTech

SKU

6-34-6NM-2

Category

Conduit & Fittings

Weight

3.1 lbs

Dimensions

14.00" x 9.00" x 2.00"

Price

$31.00

Availability

In stock (2 available)

Rating

0 / 5.0