Wesanco 5/8 Threaded Rod 10 W7127EG10FT

The Wesanco W7127EG10FT is a ten foot length of 5/8 inch threaded rod used for suspending mechanical services from structure.

Threaded rod is the standard method of hanging pipe, duct, and equipment from a ceiling or structure. It is cheap, available in a range of diameters, and can be cut to any length and adjusted with nuts.

Rod diameter is selected against the load, and the tables that govern it are published in the relevant mechanical codes and by manufacturers. At 5/8 inch this is a substantial size, suited to heavier loads than the 3/8 and 1/2 inch rod used for lighter service.

Several points determine whether a rod hanger performs as intended.

The rod must be loaded in tension along its axis. A rod hanging at an angle, or one loaded sideways, is subject to bending, and threaded rod is weak in bending because the thread roots concentrate stress.

Cut ends should be dressed so the nut runs on freely, and cutting with an abrasive wheel leaves a burr that damages threads.

Nuts must be fully engaged, with the rod visible through or level with the nut face, and locking or double nuts used where vibration is present.

Confirm rod diameter, length, thread specification, finish, and load capacity against the application and the structural attachment.

Brand

Wesanco

SKU

W7127EG10FT

Category

Threaded Rod

Weight

10.4 lbs

Dimensions

120.00" x 0.63" x 0.63"

Price

$42.00

Availability

In stock (6 available)

Rating

0 / 5.0