Style Crest Furnace 80% MG1E-070F1AAM2

The Style Crest MG1E-070F1AAM2 is an 80 percent AFUE gas furnace rated at approximately 70,000 BTU input, supplied for manufactured and modular housing applications.

Furnaces intended for manufactured housing differ from site built residential equipment in ways that matter at installation. They are typically downflow configuration, designed to discharge into the underfloor duct system characteristic of these homes, and they are approved for the specific installation conditions and clearances found in manufactured construction. Substituting a conventional residential furnace is generally not permissible under the applicable standards.

An 80 percent AFUE rating means roughly eighty percent of the fuel's energy is delivered as usable heat, with the balance leaving through the flue. These furnaces vent through a conventional flue rather than the sealed PVC venting used by condensing equipment, which keeps installation and replacement straightforward in homes with an existing metal chimney or roof jack.

At approximately 70,000 BTU input, the unit suits typical single and multi-section manufactured homes, with actual sizing dependent on floor area, insulation levels, and climate.

Applications include manufactured home furnace replacement, modular housing, and park model installations.

Installation requires verification of gas type and supply pressure, correct venting and combustion air provision, proper duct connection to the existing underfloor system, and a full commissioning check including manifold pressure, temperature rise, and safety control operation. Confirm dimensional and duct fitment against the existing unit before ordering.

Brand

Style Crest

SKU

MG1E-070F1AAM2

Category

Gas Furnaces

Weight

152 lbs

Dimensions

23.80" x 19.80" x 56.00"

Price

$1,744.00

Availability

In stock

Rating

0 / 5.0